Signal Conditioning The MM1-0832L is a GaAs MMIC double balanced mixer that is designed for and operates at X through K bands. MM1-0832L is a low power K band mixer that works well as both an up and down converter.
MM1-0832LS
Marki Microwave
1:
$898.07
5 In Stock
New At Mouser
Mouser Part No 10-MM1-0832LS
New At Mouser
Marki Microwave
Signal Conditioning The MM1-0832L is a GaAs MMIC double balanced mixer that is designed for and operates at X through K bands. MM1-0832L is a low power K band mixer that works well as both an up and down converter.
5 In Stock
Buy
Min.: 1 Mult.: 1
Details
Signal Conditioning
Mixers
0 Hz to 12 GHz, 8 GHz to 32 GHz
0 Hz to 12 GHz, 8 GHz to 32 GHz
50 Ohms
Connector
- 55 C
+ 100 C
Signal Conditioning The MM2-0530L is a passive MMIC triple balanced mixer. It features a broadband IF port that spans from 2 to 20 GHz, and has excellent spurious suppression. The MM2-0530L is available as a wire bondable chip or connectorized SMA package.
MM2-0530LS
Marki Microwave
1:
$1,132.03
5 In Stock
New At Mouser
Mouser Part No 10-MM2-0530LS
New At Mouser
Marki Microwave
Signal Conditioning The MM2-0530L is a passive MMIC triple balanced mixer. It features a broadband IF port that spans from 2 to 20 GHz, and has excellent spurious suppression. The MM2-0530L is available as a wire bondable chip or connectorized SMA package.
5 In Stock
Buy
Min.: 1 Mult.: 1
Details
Signal Conditioning
Mixers
Connector
- 55 C
+ 100 C
Signal Conditioning The MMIQ-0416L is a low LO drive, passive GaAs MMIC IQ mixer. This is an ultra-broadband mixer spanning 4 to 16 GHz on the RF and LO ports with an IF from DC to 6 GHz.
MMIQ-0416LS
Marki Microwave
1:
$2,339.54
3 In Stock
New At Mouser
Mouser Part No 10-MMIQ-0416LS
New At Mouser
Marki Microwave
Signal Conditioning The MMIQ-0416L is a low LO drive, passive GaAs MMIC IQ mixer. This is an ultra-broadband mixer spanning 4 to 16 GHz on the RF and LO ports with an IF from DC to 6 GHz.
3 In Stock
Buy
Min.: 1 Mult.: 1
Details
Signal Conditioning
Mixers
Connector
- 55 C
+ 100 C
Signal Conditioning The MQS-0218SM is a MMIC 2GHz - 18GHz 90 splitter/combiner. Passive GaAs MMIC technology allows production of smaller constructions that replace larger form factor circuit board constructions. The MQS-0218SM is available as a 4 x 4 mm QFN package.
MQS-0218SM
Marki Microwave
1:
$177.98
24 In Stock
Mouser Part No 10-MQS-0218SM
Marki Microwave
Signal Conditioning The MQS-0218SM is a MMIC 2GHz - 18GHz 90 splitter/combiner. Passive GaAs MMIC technology allows production of smaller constructions that replace larger form factor circuit board constructions. The MQS-0218SM is available as a 4 x 4 mm QFN package.
24 In Stock
1
$177.98
5
$148.31
10
$127.12
25
$115.57
Buy
Min.: 1 Mult.: 1
Details
Signal Conditioning
Signal Conditioning The PBR-0003 is a 300 kHz to 3 GHz high isolation power combiner. This power combiner features a unique hand tuned construction based on a bridge coupler that enables 45 dB typical isolation across the operational bandwidth.
PBR-0003
Marki Microwave
1:
$898.07
5 In Stock
New At Mouser
Mouser Part No 10-PBR-0003
New At Mouser
Marki Microwave
Signal Conditioning The PBR-0003 is a 300 kHz to 3 GHz high isolation power combiner. This power combiner features a unique hand tuned construction based on a bridge coupler that enables 45 dB typical isolation across the operational bandwidth.
5 In Stock
Buy
Min.: 1 Mult.: 1
Details
Signal Conditioning
Power Combiners
Connector
Signal Conditioning The T3-1040G is a high performance mixer featuring LO/RF from 10 to 40 GHz and IF from 1 to 18 GHz.
T3-1040GLN
Marki Microwave
1:
$1,803.70
4 In Stock
New At Mouser
Mouser Part No 10-T3-1040GLN
New At Mouser
Marki Microwave
Signal Conditioning The T3-1040G is a high performance mixer featuring LO/RF from 10 to 40 GHz and IF from 1 to 18 GHz.
4 In Stock
Buy
Min.: 1 Mult.: 1
Details
Signal Conditioning
Mixers
10 GHz to 40 GHz
Connector
- 55 C
+ 100 C
Signal Conditioning The T3-12 is a high performance mixer featuring LO/RF from 10 MHz to 12 GHz and IF from 1 MHz to 4 GHz.
T3-12LQP
Marki Microwave
1:
$1,424.84
5 In Stock
New At Mouser
Mouser Part No 10-T3-12LQP
New At Mouser
Marki Microwave
Signal Conditioning The T3-12 is a high performance mixer featuring LO/RF from 10 MHz to 12 GHz and IF from 1 MHz to 4 GHz.
5 In Stock
Buy
Min.: 1 Mult.: 1
Details
Signal Conditioning
Mixers
10 MHz to 12 GHz, 1 MHz to 4 GHz
50 Ohms
Connector
- 55 C
+ 100 C
Signal Conditioning The ABSD-10169PSM is a GaAs active MMIC balun in a 3mm QFN surface mount package. Its frequency ranges from DC to 30 GHz and offers 9 dB single ended to differential gain (low end limited by DC block).
ABSD-10169PSM
Marki Microwave
1:
$134.26
25 Expected 26/06/2026
New Product
Mouser Part No 10-ABSD-10169PSM
New Product
Marki Microwave
Signal Conditioning The ABSD-10169PSM is a GaAs active MMIC balun in a 3mm QFN surface mount package. Its frequency ranges from DC to 30 GHz and offers 9 dB single ended to differential gain (low end limited by DC block).
25 Expected 26/06/2026
1
$134.26
5
$111.88
10
$95.90
25
$87.18
Buy
Min.: 1 Mult.: 1
Details
Signal Conditioning
Signal Conditioning A broadband balun, hand-tuned for optimal phase and amplitude balance over a 200 kHz to 6 GHz bandwidth.
BAL-0006
Marki Microwave
1:
$817.58
10 On Order
New At Mouser
Mouser Part No 10-BAL-0006
New At Mouser
Marki Microwave
Signal Conditioning A broadband balun, hand-tuned for optimal phase and amplitude balance over a 200 kHz to 6 GHz bandwidth.
10 On Order
View Dates
On Order:
2 Expected 31/07/2026
8 Expected 14/09/2026
Factory Lead Time:
12 Weeks
Buy
Min.: 1 Mult.: 1
Details
Signal Conditioning
Baluns
200 kHz to 6 GHz
200 kHz to 6 GHz
50 Ohms
Signal Conditioning A broadband surface mount balun, hand-tuned for optimal phase and amplitude balance over a 10 MHz to 12 GHz bandwidth.
BAL-0012SSG
Marki Microwave
1:
$462.43
10 Expected 17/08/2026
New At Mouser
Mouser Part No 10-BAL-0012SSG
New At Mouser
Marki Microwave
Signal Conditioning A broadband surface mount balun, hand-tuned for optimal phase and amplitude balance over a 10 MHz to 12 GHz bandwidth.
10 Expected 17/08/2026
1
$462.43
5
$355.72
10
$300.28
Buy
Min.: 1 Mult.: 1
Details
Signal Conditioning
Baluns
10 MHz to 12 GHz
10 MHz to 12 GHz
SMD/SMT
- 55 C
+ 100 C
Signal Conditioning The BAL-0032SSG is a surface-mount broadband balun, hand-tuned for optimal phase and amplitude balance over an industry leading 10 MHz to 32 GHz bandwidth.
BAL-0032SSG
Marki Microwave
1:
$589.77
20 Expected 02/10/2026
New At Mouser
Mouser Part No 10-BAL-0032SSG
New At Mouser
Marki Microwave
Signal Conditioning The BAL-0032SSG is a surface-mount broadband balun, hand-tuned for optimal phase and amplitude balance over an industry leading 10 MHz to 32 GHz bandwidth.
20 Expected 02/10/2026
1
$589.77
5
$453.67
10
$382.97
Buy
Min.: 1 Mult.: 1
Details
Signal Conditioning
Baluns
10 MHz to 32 GHz
10 MHz to 32 GHz
- 55 C
+ 100 C
Signal Conditioning A broadband balun, hand-tuned for optimal phase and amplitude balance over a 200 kHz to 6 GHz bandwidth.
BALH-0006
Marki Microwave
1:
$943.35
6 Expected 31/07/2026
New At Mouser
Mouser Part No 10-BALH-0006
New At Mouser
Marki Microwave
Signal Conditioning A broadband balun, hand-tuned for optimal phase and amplitude balance over a 200 kHz to 6 GHz bandwidth.
6 Expected 31/07/2026
Buy
Min.: 1 Mult.: 1
Details
Signal Conditioning
Baluns
200 kHz to 6 GHz
200 kHz to 6 GHz
50 Ohms
Connector
Signal Conditioning A broadband surface mount balun, hand-tuned for optimal phase and amplitude balance over a 500 kHz to 6 GHz bandwidth.
BALH-0009SMG
Marki Microwave
1:
$343.29
19 Expected 17/08/2026
New At Mouser
Mouser Part No 10-BALH-0009SMG
New At Mouser
Marki Microwave
Signal Conditioning A broadband surface mount balun, hand-tuned for optimal phase and amplitude balance over a 500 kHz to 6 GHz bandwidth.
19 Expected 17/08/2026
1
$343.29
5
$264.07
10
$222.92
Buy
Min.: 1 Mult.: 1
Details
Signal Conditioning
Baluns
500 kHz to 9 GHz
500 kHz to 9 GHz
SMD/SMT
Signal Conditioning The BT-0018 is constructed using a custom-made, resonance-free conical inductor to achieve extremely broadband performance.
BT-0018
Marki Microwave
1:
$634.28
7 Expected 07/07/2026
New At Mouser
Mouser Part No 10-BT-0018
New At Mouser
Marki Microwave
Signal Conditioning The BT-0018 is constructed using a custom-made, resonance-free conical inductor to achieve extremely broadband performance.
7 Expected 07/07/2026
Buy
Min.: 1 Mult.: 1
Details
Signal Conditioning
Bias Tees
50 Ohms
Connector
Signal Conditioning A packaged bias tee featuring excellent insertion loss and superior isolations over a broad 500 kHz to 12 GHz bandwidth.
BTL-0012SMG-1
Marki Microwave
1:
$207.23
10 Expected 26/06/2026
New At Mouser
Mouser Part No 10-BTL-0012SMG-1
New At Mouser
Marki Microwave
Signal Conditioning A packaged bias tee featuring excellent insertion loss and superior isolations over a broad 500 kHz to 12 GHz bandwidth.
10 Expected 26/06/2026
1
$207.23
5
$159.40
10
$134.56
Buy
Min.: 1 Mult.: 1
Details
Signal Conditioning
500 kHz to 12 GHz
500 kHz to 12 GHz
30 V
50 Ohms
SMD/SMT
- 55 C
+ 100 C
Signal Conditioning This coupler features a unique air-line construction that simultaneously enables extremely low loss, minimal return loss, and outstanding directivity throughout the entire frequency range to 50 GHz.
CA-50
Marki Microwave
1:
$1,954.63
1 Expected 23/10/2026
New At Mouser
Mouser Part No 10-CA-50
New At Mouser
Marki Microwave
Signal Conditioning This coupler features a unique air-line construction that simultaneously enables extremely low loss, minimal return loss, and outstanding directivity throughout the entire frequency range to 50 GHz.
1 Expected 23/10/2026
Buy
Min.: 1 Mult.: 1
Details
Signal Conditioning
Signal Conditioning A high-power GaAs Schottky diode signal limiter featuring high IP3 over a broad DC-10GHz bandwidth. It offers low insertion loss and excellent return loss from DC through X band and has a typical 1 dB compression point of 11 dBm.
HLM-100001PSM
Marki Microwave
1:
$77.50
134 On Order
New At Mouser
Mouser Part No 10-HLM-100001PSM
New At Mouser
Marki Microwave
Signal Conditioning A high-power GaAs Schottky diode signal limiter featuring high IP3 over a broad DC-10GHz bandwidth. It offers low insertion loss and excellent return loss from DC through X band and has a typical 1 dB compression point of 11 dBm.
134 On Order
View Dates
On Order:
9 Expected 14/08/2026
100 Expected 04/09/2026
25 Expected 08/09/2026
Factory Lead Time:
10 Weeks
1
$77.50
5
$64.58
10
$55.35
25
$50.32
Buy
Min.: 1 Mult.: 1
Details
Signal Conditioning
0 Hz to 10 GHz
0 Hz to 10 GHz
50 Ohms
SMD/SMT
- 55 C
+ 100 C
Signal Conditioning The HLM-40PSM is a high-power GaAs Schottky diode signal limiter featuring high IP3 over a broad DC-40GHz bandwidth. It offers low insertion loss and excellent return loss from DC through Ka band and has a typical 1 dB compression point of 14 dBm.
HLM-40PSM
Marki Microwave
1:
$94.89
49 Expected 20/07/2026
New At Mouser
Mouser Part No 10-HLM-40PSM
New At Mouser
Marki Microwave
Signal Conditioning The HLM-40PSM is a high-power GaAs Schottky diode signal limiter featuring high IP3 over a broad DC-40GHz bandwidth. It offers low insertion loss and excellent return loss from DC through Ka band and has a typical 1 dB compression point of 14 dBm.
49 Expected 20/07/2026
1
$94.89
5
$77.63
10
$65.70
25
$58.99
100
$55.45
Buy
Min.: 1 Mult.: 1
Details
Signal Conditioning
0 Hz to 40 GHz
0 Hz to 40 GHz
SMD/SMT
- 55 C
+ 100 C
Signal Conditioning The HLM-70CSP2 is a high-linearity GaAs Schottky diode signal limiter featuring high IP3 over a broad DC - 70GHz bandwidth. It offers low insertion loss and excellent return loss over a wide operating bandwidth.
HLM-70CSP2
Marki Microwave
1:
$138.12
20 Expected 29/09/2026
New Product
Mouser Part No 10-HLM-70CSP2
New Product
Marki Microwave
Signal Conditioning The HLM-70CSP2 is a high-linearity GaAs Schottky diode signal limiter featuring high IP3 over a broad DC - 70GHz bandwidth. It offers low insertion loss and excellent return loss over a wide operating bandwidth.
20 Expected 29/09/2026
1
$138.12
5
$115.10
10
$98.66
25
$89.69
Buy
Min.: 1 Mult.: 1
Details
Signal Conditioning
Signal Conditioning A high-power GaAs Schottky diode signal limiter featuring high IP3 over a broad DC - 40GHz bandwidth. It offers low insertion loss and excellent return loss from DC through Ka band and has a typical 1 dB compression point of +11 dBm.
HLM-8010CSP1
Marki Microwave
1:
$103.64
94 On Order
New At Mouser
Mouser Part No 10-HLM-8010CSP1
New At Mouser
Marki Microwave
Signal Conditioning A high-power GaAs Schottky diode signal limiter featuring high IP3 over a broad DC - 40GHz bandwidth. It offers low insertion loss and excellent return loss from DC through Ka band and has a typical 1 dB compression point of +11 dBm.
94 On Order
View Dates
On Order:
69 Expected 13/07/2026
25 Expected 07/08/2026
Factory Lead Time:
10 Weeks
1
$103.64
5
$86.37
10
$74.03
25
$67.30
Buy
Min.: 1 Mult.: 1
Signal Conditioning
0 Hz to 40 GHz
0 Hz to 40 GHz
SMD/SMT
- 55 C
+ 100 C
Signal Conditioning The MBAL-0220CSP2 is a GaAs passive MMIC balun featuring a frequency range of 2 to 20 GHz. This balun offers low 1.9 dB insertion loss as a mode converter, excellent balance and 27 dB common mode rejection in a compact 2.5 mm CSP2 chip scale package.
MBAL-0220CSP2
Marki Microwave
1:
$191.75
44 Expected 26/06/2026
New At Mouser
Mouser Part No 10-MBAL-0220CSP2
New At Mouser
Marki Microwave
Signal Conditioning The MBAL-0220CSP2 is a GaAs passive MMIC balun featuring a frequency range of 2 to 20 GHz. This balun offers low 1.9 dB insertion loss as a mode converter, excellent balance and 27 dB common mode rejection in a compact 2.5 mm CSP2 chip scale package.
44 Expected 26/06/2026
1
$191.75
5
$159.80
10
$136.96
25
$124.51
Buy
Min.: 1 Mult.: 1
Details
Signal Conditioning
Baluns
2 GHz to 20 GHz
2 GHz to 20 GHz
50 Ohms
SMD/SMT
- 55 C
+ 100 C
Signal Conditioning The MBAL-0250CSP2 is a GaAs passive MMIC 1:2 balun that features excellent 35 dB common mode rejection over a 2 to 50 GHz operational bandwidth.
MBAL-0250CSP2
Marki Microwave
1:
$266.92
68 On Order
New Product
Mouser Part No 10-MBAL-0250CSP2
New Product
Marki Microwave
Signal Conditioning The MBAL-0250CSP2 is a GaAs passive MMIC 1:2 balun that features excellent 35 dB common mode rejection over a 2 to 50 GHz operational bandwidth.
68 On Order
View Dates
On Order:
18 Expected 05/06/2026
25 Expected 26/06/2026
25 Expected 21/08/2026
Factory Lead Time:
10 Weeks
1
$266.92
5
$222.43
10
$190.65
25
$173.32
Buy
Min.: 1 Mult.: 1
Details
Signal Conditioning
Baluns
2 GHz to 50 GHz
2 GHz to 50 GHz
50 Ohms
SMD/SMT
- 55 C
+ 100 C
Signal Conditioning The MBAL-0R106CSP2 is a GaAs passive MMIC 1:2 balun that features excellent 33 dB common mode rejection over a 0.1 to 6 GHz operational bandwidth. It is footprint compatible with the 1:1 MBALH-0R106CSP2, offering flexibility in system design.
MBAL-0R106CSP2
Marki Microwave
1:
$141.90
25 Expected 21/08/2026
New Product
Mouser Part No 10-MBAL-0R106CSP2
New Product
Marki Microwave
Signal Conditioning The MBAL-0R106CSP2 is a GaAs passive MMIC 1:2 balun that features excellent 33 dB common mode rejection over a 0.1 to 6 GHz operational bandwidth. It is footprint compatible with the 1:1 MBALH-0R106CSP2, offering flexibility in system design.
25 Expected 21/08/2026
1
$141.90
5
$118.25
10
$101.36
25
$92.14
Buy
Min.: 1 Mult.: 1
Details
Signal Conditioning
Baluns
100 MHz to 6 GHz
100 MHz to 6 GHz
50 Ohms
SMD/SMT
- 55 C
+ 100 C
Signal Conditioning The MBAL-0R520CSP2 is a GaAs passive MMIC 1:2 balun that features excellent 31 dB common mode rejection over a 0.5 to 20 GHz operational bandwidth. It is footprint compatible with the 1:1 MBALH-0R520CSP2, offering flexibility in system design.
MBAL-0R520CSP2
Marki Microwave
1:
$218.13
50 On Order
New Product
Mouser Part No 10-MBAL-0R520CSP2
New Product
Marki Microwave
Signal Conditioning The MBAL-0R520CSP2 is a GaAs passive MMIC 1:2 balun that features excellent 31 dB common mode rejection over a 0.5 to 20 GHz operational bandwidth. It is footprint compatible with the 1:1 MBALH-0R520CSP2, offering flexibility in system design.
50 On Order
View Dates
On Order:
25 Expected 10/06/2026
25 Expected 14/08/2026
Factory Lead Time:
10 Weeks
1
$218.13
5
$181.77
10
$155.81
25
$141.64
Buy
Min.: 1 Mult.: 1
Signal Conditioning
Baluns
500 MHz to 20 GHz
500 MHz to 20 GHz
50 Ohms
SMD/SMT
- 55 C
+ 100 C
Signal Conditioning The MFBP-00002PSM family of passive MMIC surface mount bandpass filters are an ideal solution for small form factor, high rejection filtering. The MFBP-00002PSM is available as a 4x4mm plastic QFN.
MFBP-00002PSM
Marki Microwave
1:
$142.83
25 Expected 10/07/2026
New At Mouser
Mouser Part No 10-MFBP-00002PSM
New At Mouser
Marki Microwave
Signal Conditioning The MFBP-00002PSM family of passive MMIC surface mount bandpass filters are an ideal solution for small form factor, high rejection filtering. The MFBP-00002PSM is available as a 4x4mm plastic QFN.
25 Expected 10/07/2026
1
$142.83
5
$116.86
10
$98.88
25
$89.89
100
$83.47
Buy
Min.: 1 Mult.: 1
Details
Signal Conditioning
Israel