Marki Microwave Signal Conditioning

Signal Conditioning The MDPX-00005PSM is a MMIC surface mount diplexer capable of multiplexing low frequency DC to 8 GHz and high frequency 10 to 28 GHz signals. The MDPX-00005PSM is available as a 4x4mm QFN and connectorized evaluation board.

Signal Conditioning The MDPX-00007PSM is a MMIC surface mount diplexer capable of multiplexing low frequency DC to 12 GHz and high frequency 14 to 28 GHz signals.The MDPX-00007PSM is available as a 4x4mm QFN and connectorized evaluation board.

Signal Conditioning The MDPX-0305 is a broadband passive MMIC diplexer, a combination high pass and loss pass filter, capable of multiplexing low frequency DC to 3 GHz and high frequency 10 to 26.5 GHz signals.

Signal Conditioning The MDPX-0407 is a broadband passive MMIC diplexer, a combination high pass and loss pass filter, capable of multiplexing low frequency DC to 4 GHz and high frequency 7 to 26.5 GHz signals.

Signal Conditioning The MDPX-0609 is a broadband passive MMIC diplexer, a combination high pass and loss pass filter, capable of multiplexing low frequency DC to 6 GHz and high frequency 9 to 26.5 GHz signals.

Signal Conditioning This equalizer provides positive slope from DC to 40 GHz with a DC attenuation value of 10dB and a 50-ohm match maintained over the entire operating range.

Signal Conditioning This equalizer provides 7.8 dB positive slope equalization from DC to 60 GHz with a DC attenuation value of 10 dB and a 50-ohm match maintained over the entire operating range.

Signal Conditioning This equalizer provides positive slope from DC to 40 GHz with a DC attenuation value of 6 dB and a 50-ohm match maintained over the entire operating range.

Signal Conditioning This bandpass filter is an ideal solution for small form factor, high rejection filtering; featuring a 14.17-17.83 GHz 1 dBc passband, 3.1 dB center frequency insertion loss and 17 dB return loss. Available in a connectorized bullet housing.

Signal Conditioning The MFBA-00002PSM family of passive MMIC surface mount bandpass filters are an ideal solution for small form factor, high rejection filtering. The MFBA-00002PSM is available as a 5x5mm plastic QFN.

Signal Conditioning This bandpass filter is an ideal solution for small form factor, high rejection filtering; featuring a 8.51-12.11 GHz 1 dBc passband, 2.3 dB center frequency insertion loss and 23 dB return loss. Available in a connectorized bullet housing.

Signal Conditioning The MFBC-00001PSM family of passive MMIC surface mount bandpass filters are an ideal solution for small form factor, high rejection filtering. The MFBC-00001PSM is available as a 5x5mm plastic QFN.