SparkFun Accessories Flex Sensor 4.5"

SparkFun Accessories This is a simple cable that adapts from a USB port to a 5.5x2.1mm barrel connector center positive. This cable allows the user to use a USB port on a computer laptop or on our cigarette power supply to provide our development boards with 5V.The US

SparkFun Accessories Tip tinner is a good thing to have in your arsenal of soldering supplies. Composed of a mild acid it helps remove baked on residue (for when you melt your desk top) and helps prevent oxidation (the nasty black stuff) that accumulates on your solderi

SparkFun Accessories Electret Microphone

SparkFun Accessories The QRE1113 is a small IR reflectance sensor. This sensor is often used in line following robots because if it can sense if a surface is white or black.There are four pins on the QRE1113 - two control the IR emitting LED while the other two are the

SparkFun Accessories This is a simple LED-illuminated tactile button with a green cap. It's just like a basic tactile button but it lights up green! So now you can get visual feedback or light up your project. These have a 12mm body and are rated for 50mA. They don't e

SparkFun Accessories It's the end of the world and you need a button to press. This is it. A 100mm diameter (outside diameter) dome illuminated push button comes with an LED securing nut and a pre-installed long life horizontal microswitch. Button can also be adjusted

SparkFun Accessories Cherry MX Keyswitches are top-of-the-line mechanical keyboard switches. They re satisfyingly clicky reliable up to tens-of-millions of key presses and a standard in gaming and programming keyboards across the globe. This 'blue' version Cher

SparkFun Accessories TRRS connectors are the audio-style connectors that you see on some phones MP3 players and development boards. TRRS stands for "Tip Ring Ring Sleeve " which reflects the fact that unlike a standard stereo connector this actually has three condu

SparkFun Accessories Screw Terminals 5mm Pitch (3-Pin)

SparkFun Accessories This is a right-angle 24-pin Molex Mini-Fit Jr. connector commonly used as the power supply connector on ATX motherboards. Two rows of twelve pins are broken out two rows of through-hole male headers. See the datasheet below for pin spacing dime

SparkFun Accessories This is a simple three wire cable. Great for jumping from board to board or just about anything else. There is a 3-pin JST connector on one end bare cable on the opposite end. It also comes with the mating connector for the JST.