SparkFun Accessories We use barrel jacks a lot around here and sometimes we need to pop a switch into the mix. That usually means hacking up a perfectly good barrel jack extension cable but the whole point of using the barrel jacks was so that we wouldn't have to hack t
COM-11705
SparkFun
1:
$3.50
48 In Stock
Mouser Part No
474-COM-11705
SparkFun
SparkFun Accessories We use barrel jacks a lot around here and sometimes we need to pop a switch into the mix. That usually means hacking up a perfectly good barrel jack extension cable but the whole point of using the barrel jacks was so that we wouldn't have to hack t
48 In Stock
Buy
Min.: 1
Mult.: 1
SparkFun Accessories This Magnetic Door Switch Set is a small reed switch assembly that alerts you when doors drawers or other openings open. These types of switches are primarily used in home security systems. One half of the assembly mounts on a window or door frame
COM-13247
SparkFun
1:
$4.50
86 In Stock
Mouser Part No
474-COM-13247
SparkFun
SparkFun Accessories This Magnetic Door Switch Set is a small reed switch assembly that alerts you when doors drawers or other openings open. These types of switches are primarily used in home security systems. One half of the assembly mounts on a window or door frame
86 In Stock
Buy
Min.: 1
Mult.: 1
SparkFun Accessories LED RGB Strip Addressable, 1m
COM-14015
SparkFun
1:
$18.19
22 In Stock
Mouser Part No
474-COM-14015
SparkFun
SparkFun Accessories LED RGB Strip Addressable, 1m
22 In Stock
Buy
Min.: 1
Mult.: 1
Details
SparkFun Accessories You don't have to worry about adding a resistor to an LED if you get an LED with a built in resistor! This pack of 25 red 5mm LEDs will help alleviate any frustrations you've had with accidentally burning them out by having a resistor in the diode it
COM-14560
SparkFun
1:
$12.50
3 In Stock
Mouser Part No
474-COM-14560
SparkFun
SparkFun Accessories You don't have to worry about adding a resistor to an LED if you get an LED with a built in resistor! This pack of 25 red 5mm LEDs will help alleviate any frustrations you've had with accidentally burning them out by having a resistor in the diode it
3 In Stock
Buy
Min.: 1
Mult.: 1
Details
SparkFun Accessories These are the sturdy little stomp switches that you find on guitar effects pedals. They re 3PDT (three-pole double-throw) type switches. These switches allow you to modify your effects for true bypass and lets you wire a status indicator LED. This
COM-15133
SparkFun
1:
$4.75
44 In Stock
Mouser Part No
474-COM-15133
SparkFun
SparkFun Accessories These are the sturdy little stomp switches that you find on guitar effects pedals. They re 3PDT (three-pole double-throw) type switches. These switches allow you to modify your effects for true bypass and lets you wire a status indicator LED. This
44 In Stock
Buy
Min.: 1
Mult.: 1
Details
SparkFun Accessories LilyPad Button Board
DEV-08776
SparkFun
1:
$2.10
42 In Stock
Mouser Part No
474-DEV-08776
SparkFun
SparkFun Accessories LilyPad Button Board
42 In Stock
Buy
Min.: 1
Mult.: 1
Details
SparkFun Accessories This is 12 meters of smooth conductive thread spun from stainless steel fiber and wound on a plastic bobbin. Use it to sew up all of your e-textile projects. This small bobbin is a great way to get into wearable electronics without the upfront cost o
DEV-13814
SparkFun
1:
$8.07
18 In Stock
Mouser Part No
474-DEV-13814
SparkFun
SparkFun Accessories This is 12 meters of smooth conductive thread spun from stainless steel fiber and wound on a plastic bobbin. Use it to sew up all of your e-textile projects. This small bobbin is a great way to get into wearable electronics without the upfront cost o
18 In Stock
Buy
Min.: 1
Mult.: 1
SparkFun Accessories Arduino ProtoShield- Bare PCB
DEV-13819
SparkFun
1:
$6.95
22 In Stock
Mouser Part No
474-DEV-13819
SparkFun
SparkFun Accessories Arduino ProtoShield- Bare PCB
22 In Stock
Buy
Min.: 1
Mult.: 1
Details
SparkFun Accessories LilyPad Coin Cell Battery Holder 20mm
DEV-13883
SparkFun
1:
$2.50
341 In Stock
Mouser Part No
474-DEV-13883
SparkFun
SparkFun Accessories LilyPad Coin Cell Battery Holder 20mm
341 In Stock
Buy
Min.: 1
Mult.: 1
Details
SparkFun Accessories LilyPad LED White (5pcs)
DEV-13902
SparkFun
1:
$3.60
84 In Stock
Mouser Part No
474-DEV-13902
SparkFun
SparkFun Accessories LilyPad LED White (5pcs)
84 In Stock
Buy
Min.: 1
Mult.: 1
Details
SparkFun Accessories LilyPad LED Rainbow (6 colors)
DEV-13903
SparkFun
1:
$4.75
8 In Stock
15 Expected 03/11/2026
Mouser Part No
474-DEV-13903
SparkFun
SparkFun Accessories LilyPad LED Rainbow (6 colors)
8 In Stock
15 Expected 03/11/2026
Buy
Min.: 1
Mult.: 1
Details
SparkFun Accessories LilyPad LED Pink (5pcs)
DEV-14010
SparkFun
1:
$3.50
9 In Stock
Mouser Part No
474-DEV-14010
SparkFun
SparkFun Accessories LilyPad LED Pink (5pcs)
9 In Stock
Buy
Min.: 1
Mult.: 1
Details
SparkFun Accessories LilyPad LED Green (5pcs)
DEV-14011
SparkFun
1:
$3.60
45 In Stock
Mouser Part No
474-DEV-14011
SparkFun
SparkFun Accessories LilyPad LED Green (5pcs)
45 In Stock
Buy
Min.: 1
Mult.: 1
Details
SparkFun Accessories LilyPad LED Blue (5pcs)
DEV-14012
SparkFun
1:
$3.55
1 In Stock
10 Expected 18/12/2026
Mouser Part No
474-DEV-14012
SparkFun
SparkFun Accessories LilyPad LED Blue (5pcs)
1 In Stock
10 Expected 18/12/2026
Buy
Min.: 1
Mult.: 1
Details
SparkFun Accessories LilyPad LED Red (5pcs)
DEV-14013
SparkFun
1:
$3.95
71 In Stock
Mouser Part No
474-DEV-14013
SparkFun
SparkFun Accessories LilyPad LED Red (5pcs)
71 In Stock
Buy
Min.: 1
Mult.: 1
Details
SparkFun Accessories LilyPad LED Yellow (5pcs)
DEV-14014
SparkFun
1:
$3.55
8 In Stock
Mouser Part No
474-DEV-14014
SparkFun
SparkFun Accessories LilyPad LED Yellow (5pcs)
8 In Stock
Buy
Min.: 1
Mult.: 1
Details
SparkFun Accessories SparkFun Qwiic Shield for Arduino
DEV-14352
SparkFun
1:
$7.75
19 In Stock
Mouser Part No
474-DEV-14352
SparkFun
SparkFun Accessories SparkFun Qwiic Shield for Arduino
19 In Stock
Buy
Min.: 1
Mult.: 1
Details
SparkFun Accessories The SparkFun Qwiic Adapter provides the perfect means to make any old I2C board into a Qwiic-enabled board. This adapter breaks out the I2C pins from the Qwiic connectors to pins that you can easily solder with your favorite I2C-enabled device.The Qw
DEV-14495
SparkFun
1:
$1.60
383 In Stock
Mouser Part No
474-DEV-14495
SparkFun
SparkFun Accessories The SparkFun Qwiic Adapter provides the perfect means to make any old I2C board into a Qwiic-enabled board. This adapter breaks out the I2C pins from the Qwiic connectors to pins that you can easily solder with your favorite I2C-enabled device.The Qw
383 In Stock
Buy
Min.: 1
Mult.: 1
Details
SparkFun Accessories The LilyPad E-Sewing ProtoSnap is a great way to explore how buttons and switches behave in simple e-sewing circuits before crafting your project. Like other LilyPad ProtoSnap series boards the individual pieces of the board are pre-wired --- allowi
DEV-14546
SparkFun
1:
$7.25
5 In Stock
Mouser Part No
474-DEV-14546
SparkFun
SparkFun Accessories The LilyPad E-Sewing ProtoSnap is a great way to explore how buttons and switches behave in simple e-sewing circuits before crafting your project. Like other LilyPad ProtoSnap series boards the individual pieces of the board are pre-wired --- allowi
5 In Stock
Buy
Min.: 1
Mult.: 1
Details
SparkFun Accessories The SparkFun Qwiic Shield for Arduino Nano provides you with a quick and easy way to enter into SparkFun's Qwiic ecosystem with your Arduino Nano board. The Qwiic shield connects the I2C bus (GND 3.3V SDA and SCL) on your Arduino Nano to four Spark
DEV-16789
SparkFun
1:
$5.50
14 In Stock
Mouser Part No
474-DEV-16789
SparkFun
SparkFun Accessories The SparkFun Qwiic Shield for Arduino Nano provides you with a quick and easy way to enter into SparkFun's Qwiic ecosystem with your Arduino Nano board. The Qwiic shield connects the I2C bus (GND 3.3V SDA and SCL) on your Arduino Nano to four Spark
14 In Stock
Buy
Min.: 1
Mult.: 1
SparkFun Accessories The SparkFun MicroMod Data Logging Board offers a highly customizable low-power data logging platform using the MicroMod system allowing you to choose your own Processor to pair with the Carrier Board. The Data Logging Carrier Board breaks out conne
+3 images
DEV-16829
SparkFun
1:
$22.95
4 In Stock
Mouser Part No
474-DEV-16829
SparkFun
SparkFun Accessories The SparkFun MicroMod Data Logging Board offers a highly customizable low-power data logging platform using the MicroMod system allowing you to choose your own Processor to pair with the Carrier Board. The Data Logging Carrier Board breaks out conne
4 In Stock
Buy
Min.: 1
Mult.: 1
SparkFun Accessories Access all the pins (i.e. ATP) of the MicroMod Processor Boards with the SparkFun MicroMod ATP Carrier Board! This board breaks out the MicroMod Processor Board's pins on the M.2 connector to 0.1" spaced female headers and PTH pads on the edge of the
+3 images
DEV-16885
SparkFun
1:
$20.50
18 In Stock
4 Expected 10/11/2026
Mouser Part No
474-DEV-16885
SparkFun
SparkFun Accessories Access all the pins (i.e. ATP) of the MicroMod Processor Boards with the SparkFun MicroMod ATP Carrier Board! This board breaks out the MicroMod Processor Board's pins on the M.2 connector to 0.1" spaced female headers and PTH pads on the edge of the
18 In Stock
4 Expected 10/11/2026
Buy
Min.: 1
Mult.: 1
SparkFun Accessories The SparkFun OpenLog Artemis (OLA) is an open-source data logger designed for users who need to capture high-quality data without writing any code. Preprogrammed to automatically log serial data GPS coordinates and sensor readings to a CSV file th
DEV-19426
SparkFun
1:
$48.95
17 In Stock
Mouser Part No
474-DEV-19426
SparkFun
SparkFun Accessories The SparkFun OpenLog Artemis (OLA) is an open-source data logger designed for users who need to capture high-quality data without writing any code. Preprogrammed to automatically log serial data GPS coordinates and sensor readings to a CSV file th
17 In Stock
Buy
Min.: 1
Mult.: 1
Details
SparkFun Accessories This is a 10 pack of the MyoWare Reference 2.0 Cables. The MyoWare 2.0 Reference Cable is meant as an extension for the MyoWare 2.0 Muscle Sensor's reference pin. You will just need to insert the pin into its housing and place a biomedical sensor p
KIT-19627
SparkFun
1:
$11.64
10 In Stock
Mouser Part No
474-KIT-19627
SparkFun
SparkFun Accessories This is a 10 pack of the MyoWare Reference 2.0 Cables. The MyoWare 2.0 Reference Cable is meant as an extension for the MyoWare 2.0 Muscle Sensor's reference pin. You will just need to insert the pin into its housing and place a biomedical sensor p
10 In Stock
Buy
Min.: 1
Mult.: 1
Details
SparkFun Accessories Pogo pins make life so much easier when you are trying to program without having to solder a single thing and when you attach them to an In-system programming (ISP) adapter they become instantly better. This simple kit allows you to do just that. T
KIT-23451
SparkFun
1:
$15.50
3 In Stock
Mouser Part No
474-KIT-23451
SparkFun
SparkFun Accessories Pogo pins make life so much easier when you are trying to program without having to solder a single thing and when you attach them to an In-system programming (ISP) adapter they become instantly better. This simple kit allows you to do just that. T
3 In Stock
Buy
Min.: 1
Mult.: 1