STMicroelectronics P-L496G-CELL01/2 STM32 Discovery Packs

STMicroelectronics P-L496G-CELL01/2 STM32 Discovery Packs are turnkey development platforms for cellular and cloud technology based solutions. The P-L496G-CELL01 is for 2G/3G cellular-to-cloud, and the P-L496G-CELL02 is for LTE IoT cellular-to-cloud. The packs are composed of an STM32L496AGI6-based low-power discovery motherboard with preloaded firmware and a STMod+ cellular expansion board with antenna.

Features

  • STM32L496AGI6 microcontroller featuring 1Mbyte of Flash memory and 320Kbytes of RAM in a UFBGA169 package
  • USB OTG HS
  • On-board current measurement
  • SAI Audio CODEC
  • ST-MEMS digital microphones
  • 8-Mbit PSRAM
  • 2 user LEDs
  • 1 user and 1 reset push-buttons
  • 4-direction joystick with selection button
  • Board connectors:
    • Camera 8 bit
    • USB with Micro-AB
    • Stereo headset jack including analog microphone input
    • microSD™ card
  • Board expansion connectors:
    • Arduino™ Uno V3
    • STMod+
  • Support of a wide choice of Integrated Development Environments (IDEs) including IAR™, Keil®, GCC-based IDEs
  • Board expansion features:
    • P-L496G-CELL01: Quectel UG96 worldwide cellular modem penta-band 2G/3G module, 7.2 Mbps downlink, 5.76 Mbps uplink
    • P-L496G-CELL02: Quectel BG96 worldwide cellular modem LTE Cat M1/Cat NB1/EGPRS module 300 kbps downlink, 375 kbps uplink
    • Modem reset red LED and modem signaling green LED
    • Switchable SIM interface, eSIM and MicroSIM
    • P-L496G-CELL01: Pulse 2G/3G SMA antenna for frequency ranges: 850/900/1800/1900/2100MHz
    • P-L496G-CELL02: Pulse SMA antenna for frequency ranges: 824/900/1800/1900/2100MHz
  • Flexible power-supply options: ST-LINK, USB VBUS, or external sources
  • On-board ST-LINK/V2-1 SWD,TAG debugger/programmer with USB reenumeration capability: mass storage, virtual COM port and debug port
  • Comprehensive free software libraries and examples available with the STM32Cube package

Videos

Published: 2018-04-17 | Updated: 2023-02-06